Anhydrous engine cleaner is used by spraying the product directly into the vehicle engine. It removes impurities from the oil in the car engine effortlessly.
Shake it before use.
- UAE, Fujairah
- +971 56 723 6723 Vin petrol car care since 2012 Manager
WATERLESS ENGINE CLEANER 500
45,00 د.إ
Anhydrous engine cleaner is used by spraying the product directly into the vehicle engine. It removes impurities from the oil in the car engine effortlessly.
Shake it before use.
Related products
TIRE SHINE FOAM 500ML
30,00 د.إ
Please shake the rubber polisher product before use. Then spray it steeply on the vehicle tire. Wait for the polisher to dry for about 1 minute.
ENGINE AND WHEEL CLEANER SPRAY
25,00 د.إ
WIEBERR Engine & Wheel Cleaner is used for cleaning all types of heavy dirt and residues that accumulate on vehicle engines and wheels. The engine and wheel cleaner is suitable for direct use and can also be used in concentrated form. Depending on the density of the dirt, it is diluted with water at a ratio of 1/3 standard hardness and sprayed onto the surface to be cleaned. After waiting for approximately 2 minutes, the softened grease and dirt are cleaned off with pressurized water. After the cleaning process, it leaves a clean and visually appealing finish.
WHEEL CLEANER 500CC
50,00 د.إ
WIEBERR Wheel Cleaner is a product designed to clean heavy dirt and grease residues on vehicle wheels. The wheel cleaner is suitable for direct use and concentrated use. Depending on the intensity of the dirt, it is diluted with water at a ratio of 1/5 of standard hardness. The product is applied directly to the vehicle wheels by spraying. After waiting for approximately 2 minutes, softened dirt and grease residues are washed off with pressurized water. The cleaning process leaves a shiny and visually appealing appearance on the wheels.
REDLINE 500CC
95,00 د.إ
WIEBERR RedLine Iron Dust Preventer is a product designed to clean iron particle residues that occur due to friction on vehicle wheels, brake pads, and other moving parts. The product is applied directly to vehicle wheels and brake pads, as well as other areas with iron particles, by spraying. After waiting for approximately 1 minute, the iron particles react with the product, turning red, and then the cleaning process is carried out using pressurized water. After the cleaning process, a shiny and visually appealing appearance is achieved on the wheels and other surfaces.
Reviews
There are no reviews yet.